Please use this identifier to cite or link to this item: https://physrep.ff.bg.ac.rs/handle/123456789/605
DC FieldValueLanguage
dc.contributor.authorAbourayana, Hisham M.en
dc.contributor.authorMilosavljević, Vladimiren
dc.contributor.authorDobbyn, Peteren
dc.contributor.authorCullen, Patrick J.en
dc.contributor.authorDowling, Denis P.en
dc.date.accessioned2022-07-12T16:01:41Z-
dc.date.available2022-07-12T16:01:41Z-
dc.date.issued2016-12-25en
dc.identifier.issn0257-8972en
dc.identifier.urihttps://physrep.ff.bg.ac.rs/handle/123456789/605-
dc.description.abstractThis study reports on the performance of a scalable barrel atmospheric plasma system for the treatment of polymer particles. A novel feature of the barrel system design is the use of a biased electrode, which also acts as the roller for the glass barrel. The plasma is generated using either helium or helium/oxygen gas mixtures. The reactor was used to activate 20 g batches of silicone, polypropylene (PP), acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate (PET) particles, each with diameters in the range 3 to 5 mm. The effect of plasma treatment time and gas flow rate on the water contact angle of the treated polymer particles was examined. The polymer water contact angles decreased from up to 140° to < 10° after the barrel plasma treatment (polymer dependent). X-ray photoelectron spectroscopy (XPS) analysis is used to monitor the effect of the plasma treatment on both PET and silicone polymer particles. Optical emission spectroscopy (OES) was used as a diagnostic tool to monitor changes in atomic and molecular species intensity with experimental conditions. Emission lines of helium, oxygen and molecular bands of OH, N2 and N2+ were monitored and correlated with their spatial distribution within the plasma chamber. Electrical characterisation studies demonstrated an increase in plasma power with increasing input voltage and helium flow rate. The heating effect of the plasma was monitored using an infrared thermographic camera, the maximum barrel temperature after 30 min treatment found to be 29 °C. While the current barrel plasma system design can treat 20 g of polymer the system design has the potential to be readily scalable for the activation of larger batches of particles.en
dc.relation.ispartofSurface and Coatings Technologyen
dc.subjectAtmospheric pressure plasmaen
dc.subjectBarrel reactoren
dc.subjectOptical emission spectroscopyen
dc.subjectPolymer particleen
dc.titleInvestigation of a scalable barrel atmospheric plasma reactor for the treatment of polymer particlesen
dc.typeArticleen
dc.identifier.doi10.1016/j.surfcoat.2016.06.094en
dc.identifier.scopus2-s2.0-84995873382en
dc.identifier.urlhttps://api.elsevier.com/content/abstract/scopus_id/84995873382en
dc.relation.volume308en
dc.relation.firstpage435en
dc.relation.lastpage441en
item.openairetypeArticle-
item.cerifentitytypePublications-
item.fulltextNo Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.grantfulltextnone-
crisitem.author.orcid0000-0002-7805-5189-
Appears in Collections:Journal Article
Show simple item record

SCOPUSTM   
Citations

11
checked on Nov 16, 2024

Page view(s)

30
checked on Nov 21, 2024

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.