Please use this identifier to cite or link to this item: https://physrep.ff.bg.ac.rs/handle/123456789/998
DC FieldValueLanguage
dc.contributor.authorĆirić, Aleksandaren
dc.contributor.authorStojadinović, Stevanen
dc.contributor.authorDramićanin, Miroslav D.en
dc.date.accessioned2022-07-12T18:11:52Z-
dc.date.available2022-07-12T18:11:52Z-
dc.date.issued2022-04-15en
dc.identifier.issn0925-8388en
dc.identifier.urihttps://physrep.ff.bg.ac.rs/handle/123456789/998-
dc.description.abstract15 µm thick Ti-Sapphire coatings were synthesised at room temperature by the plasma electrolytic oxidation (PEO) method for 20 min from the pure aluminium substrate and with the addition of the TiO2 particles in various concentrations in the supporting electrolyte. The coatings are featured by microscopic pores typical for PEO surfaces. The dominant is the alpha phase of alumina with the small presence of the gamma phase. The estimated average crystalline size is 41 nm. Ti is uniformly distributed in these polycrystalline ceramic coatings and does not affect morphology or phase content. Photoluminescence of PEO-created coatings shows typical absorption, excitation, and emission features of Ti-Sapphire with two broad-overlapping excitation bands in the green and blue spectral region due to the Jahn-Teller splitting of the 2Eg level and the Stokes shifted emission centred at 720 nm. 2Eg energy state splitting is equal to 2195 cm−1 and 10 Dq ≈ 19,300 cm−1. The highest emission intensity was observed in the coating prepared with the 0.1 g/L TiO2 powder concentration, i.e. 0.32 at% of incorporated Ti3+. Emission spectra recorded at temperatures ranging from 100 K to 300 K revealed the Mott-Seitz temperature dependence of emission intensity with the 1180 cm−1 activation energy. The fit to the McCumber-Sturge relation gave, for the first time, the value of Debye temperature of 594 K of Al2O3:Ti. Non-contact, luminescence temperature sensing from the temperature-induced changes in the emission bandwidth gave a high sensitivity of 3.2 cm−1 K−1 and 0.19 K temperature resolution. The PEO created Ti-sapphire coatings are a promising multifunctional barrier level – optical temperature sensor material for applications in harsh environments or on large aluminium surfaces. It shows potential to be used as a planar waveguide Ti-Sapphire laser active medium.en
dc.relation.ispartofJournal of Alloys and Compoundsen
dc.subjectAl O :Ti 2 3 3+en
dc.subjectPhotoluminescenceen
dc.subjectPlasma electrolytic oxidationen
dc.subjectTi-Sapphireen
dc.titleLuminescence of Ti-Sapphire coatings prepared by plasma electrolytic oxidation and their application in temperature sensingen
dc.typeArticleen
dc.identifier.doi10.1016/j.jallcom.2021.163544en
dc.identifier.scopus2-s2.0-85122193160en
dc.identifier.urlhttps://api.elsevier.com/content/abstract/scopus_id/85122193160en
dc.relation.volume900en
item.openairetypeArticle-
item.cerifentitytypePublications-
item.fulltextNo Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.grantfulltextnone-
crisitem.author.orcid0000-0002-6589-6296-
Appears in Collections:Journal Article
Show simple item record

SCOPUSTM   
Citations

6
checked on Nov 24, 2024

Page view(s)

32
checked on Nov 25, 2024

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.